232/300 BAR Spacer Ring - Solid Brass. Allows the use of a 200/232 BAR Filling Adaptor in a 300 BAR DIN Valve Outlet

BSA Fill Probe Kit. Fits BSA R10 / T10, Ultra, Scorpion, Sportsman and all other BSA Probe Fill Range. Standard 1/8"BSP male thread for direct fitting to a flexible fill line. Complete with spare ´O´ rings and silicone lube.

Air Arms S200 Cylinder - 232/300BAR DIN Fill Adaptor. For use on early S200 cylinders with built in pressure gauge.

Daystate Air Wolf/Air Ranger Male Connector

If you have a charging adaptor or cylinder with a male Din thread and you want to charge from a 1/8inch thread hose, then this adaptor will connect your Din thread to your hose.

Charging adaptors with male Din threads include
Air Arms S200T
Weihrauch HW100 - original spec with detachable bottle
Steyr rifles and pistols
Rohm pistols

Sought after replacement fill adaptor for your Rohm Twinmaster PCP, which allows easy filling from a standard fill line setup or from a QC03 Q/C quick coupler setup.

Pre 2012 model

Suits FX Typhoon, T12, Cyclone, Cutlas, Gladiator, Storm, Verminator, Ranchero. Standard 1/8"BSP male thread for direct fitting to a flexible fill line or one of our QC03 Q/C Plugs. Complete with spare ´O´ rings and a sachet of silicone grease.

If you have a stirrup pump or divers bottle fitted with a hose, this system will allow you to charge your Gunpower rifle.
You will need the Gunpower Charging Adaptor plus an adaptor to reduce the 1/4inch thread on the Gunpower Adaptor to the 1/8inch thread of your hose.

If you have a stirrup pump or divers bottle fitted with a 1/8inch hose, this adaptor will convert the thread to a 1/4" which is suitable for filling most buddy bottles ( BSA superten, Theoben rapid 7/ MFR? Mk2 etc, RWS500 series)

Comes complete with built in washer to prevent leaks when filling.

BSA Buddy Bottle Filling Adaptor. Also fits Theoben Rapid buddy bottle (Not MFR)

Fits - Logun Professional Mk11 / Axsor, Solo etc. Standard 1/8"BSP male thread for direct fitting to a flexible fill line or our QC03 Q/C plugs. Complete with spare ´O´ rings and silicone grease kit.

Designed for 300BAR Charging Cylinders, this adaptor fits directly into the valve and provides a 1/4BSP ´Buddy Bottle´ connection for rifles like the Theoben Rapid7 and BSA SuperTen. Complete with spare seal.

Career 707, Shinsung, Sumatra Fill Probe. Best Fittings Spec with slimmer ´O´ rings. Standard 1/8"BSP male thread for direct fitting to a flexible fill line, or one of our QC03 quick release fittings. Complete with spare ´O´ rings and silicone grease kit.

Standard Male Fill Valve Assembly complete. For Hunstman & Mk4(Gun Fitment) A genuine Daystate direct replacement part for a damaged or leaking valve

Falcon Fill Probe to fit the Falcon combined Quick Fill Silencer System. Standard 1/8"BSP male thread for direct fitting to a flexible fill line or one of our QC03 Q/C Plugs. Longer Probe. (+5mm) Also suitable for the standard Quick Fill.

Steyr LG -1/8" BSP Charging Adaptor. Sought after alternative fill adaptor for the STEYR LG, which allows easy filling from a standard fill line setup or a QC03 quick coupler setup.

This spare connector fits all modern daystates, supplied by the Daystate to assure compatibility

Suitable for the vast majority of FX rifles, the Logun mk2 and the Webley Fx2000/ Raider / Axsor etc

Suitable for all Weihrauch Hw100´s with the front quickfill port.

Air Arms Early S200 Fill Valve Replacement Kit. Replaces the valve with the external threads with a standard one, Complete With New Push On Cover Cap.

Air arms official new style "eggcup" female charge connector. They used to be brass coloured, now black .

Also fits Daystate Air Wolf, Air Ranger, Huntsman, Merlin, Mk4 etc with quick coupler filling system, along with BAM, Brocock Enigma, AimX, Crosman, Ripley and most HPA Paintball side fill nipples & other compatible fill couplers.

An alternative component for quick coupler setup utilising the older Air Arms style couplings.

Air Arms S300/310, S400/410/, Air Arms Pro Target and Air Arms MPR Fill Valve Upgrade Kit. Upgrade to the latest version of Air Arms filling system. NOT suitable for the S200.

Use for checking the residual pressure of your cylinder. Complete with bonded seal washer. Standard size fits end of fill line, or 1/8"BSP female outlet. Instructions included.

Suits the Air Wolf, Air Ranger, Huntsman, Merlin, Mk4 etc with quick coupler filling system, along with our QC03 Plug, HP Fill Valve, Brocock, Crosman, Logun Eagle, PCR1, Ripley, most HPA Paintball side fill nipples & other compatible fill couplers.

Female adaptor for most Air arms rifles up till the new "egg cup" version. The colour has changed from gold to silver but these are official Air arms chargers and hence no issue with incompatibility.

Suitable for all BSA pre-charged guns